Products

Compare

The image shows two small, round, dark cylindrical drum cymbal felts with holes in the center. These felt washers fit over cymbal stand rods, cushioning cymbals from metal contact. They protect cymbals, allow natural movement and resonance, and reduce unwanted noise. The visible dark, fibrous texture is typical of compressed felt, essential for preserving cymbal sound and durability.

TAMA 7081P Felt Washer-2 Pcs.

$6.99

Compare

The image shows a bass drum beater with a long metal shaft, a felt-tipped striking head, and a mechanical attachment for a bass drum pedal. Used on drum kits, it strikes the drum head when the pedal is pressed, producing the kick drum’s low-frequency sound. The felt surface provides a warm tone and protects the drum head. This beater is likely a replacement or upgrade for customizing sound and playability.

Sold out

TAMA CB900AS Accu-Strike Cobra Beater

$34.99

Compare

The image shows two black plastic control knobs with ribbed edges, designed for better grip. They have hollow centers for mounting on potentiometers and are likely used as replacement or aftermarket knobs on musical audio equipment such as guitar amps, mixers, effects pedals, synthesizers, or studio gear, allowing adjustment of volume, tone, gain, or effects settings.

TAMA CM8P Swingstar And Rockstar Cymbal Mate

$6.99

Compare

Tama Cobra Felt Drum Pedal Beater - CB90F

$34.99

Low stock (2 units)

Compare

The image shows a drum tuning key with a metal shaft designed to fit square tension rods on drum lugs. It has a black textured rubber grip for comfort and improved hold. Compact and portable, this essential tool allows drummers to tighten or loosen tension rods, adjusting drumhead pitch and tone. The grip helps prevent slipping, aiding precise tuning during setup or performance.

TAMA CSA15 Straight Cymbal Stacker

$26.99

Low stock (2 units)

Compare

The image shows a chrome-plated cymbal boom arm, a drum hardware component used to position cymbals at various angles and distances. It features an L-shaped bend for flexibility, a tilter mechanism with an adjustment lever for angling cymbals, a black knurled grip for secure handling, and a clamp to attach to a cymbal stand. This boom arm extends reach and enhances cymbal placement in a drum kit beyond a straight stand.

TAMA CSA25 Adjustable Cymbal Stacker

$48.99

Very low stock (1 unit)

Compare

The image shows a bass drum beater with a black "TAMA" embossed head featuring a hard black side and a softer white side, allowing different tones. It is attached to a chrome metal shaft that connects to the pedal. This dual-surface beater provides versatile sounds: a punchy attack from the hard side and a warmer tone from the soft side, making it an essential drum kit accessory.

TAMA DS30 Dual Sided Beater

$32.99

Low stock (2 units)

Compare

The image shows a chrome-plated boom cymbal stand with a tripod base and telescoping height-adjustable shaft. It features a horizontal boom arm with a tilter for angle adjustments. Rubber feet prevent slipping, and the sturdy design supports cymbals securely. The boom arm allows flexible positioning over drum kits, making it ideal for crash, ride, or effects cymbals in percussion setups.

Sold out

TAMA HC43BW Stage Master Boom Stand

$84.99

Compare

The image shows a chrome cymbal boom stand with a tripod base featuring rubber feet for stability. It has a telescoping main post for height adjustment and an angled boom arm to position cymbals at various angles and distances. Multiple wing nut clamps secure adjustments, and a cymbal holder with a felt washer tops the stand. This stand is used to place cymbals precisely in drum kits without obstructing the drummer.

TAMA HC83BW Roadpro Boom Cymbal Stand

$119.99

Low stock (2 units)

Compare

The image shows a pair of professional chrome-plated boom cymbal stands with sturdy tripod bases and rubber feet for stability. Each stand has adjustable height sections, angled boom arms for flexible positioning, wing nuts for securing adjustments, and cymbal felts at the top for mounting cymbals. These stands help drummers position cymbals at desired heights and angles, especially in tight drum kit setups.

Sold out

TAMA HC83BWX2 Roadpro Boom Cymbal Stand-2 Pack

$219.99

Compare

The image shows a professional-grade hi-hat stand with a tall chrome telescoping pole, tripod base with rubber feet, and foot pedal mechanism to open and close two cymbals. It features adjustment clamps along the stand and supports typical hi-hat cymbals (13"-15"). Pressing the pedal brings the cymbals together for the "chick" sound, essential for an acoustic drum kit.

Sold out

TAMA HH205S Iron Cobra Hi-Hat Stand

$104.99

Compare

The image shows a chrome hi-hat cymbal stand with a tripod base, adjustable legs, and a tall vertical shaft. At the top is a clutch mechanism for holding two cymbals (not visible). A foot pedal at the base controls opening and closing of the cymbals. The stand features black hardware, adjustable height, and sturdy construction, making it an essential, stable component of a drum kit for versatile playing with sticks and foot control.

TAMA HH805 Iron Cobra Hi-Hat Stand

$299.99

Very low stock (1 unit)

Compare

TAMA HH905D Iron Cobra 900 Lever Glide Hi-Hat Stand

$369.99

Very low stock (1 unit)

Compare

Sold out

TAMA HP200P Drum Pedal

$98.99

Compare

The image shows a Tama Iron Cobra 200 series double bass drum pedal with two connected foot pedals and a chain drive system. It features chrome and black metal construction, adjustable black beaters, wide footplates for stability, and branding on the pedal plates. Designed for fast, complex bass drum patterns, it’s popular in rock and metal for smooth, durable performance.

Sold out

TAMA HP200PTW Iron Cobra 200 Twin Pedal Power Glide

$239.99

Compare

The image shows a high-end double bass drum pedal with dual foot pedals connected by a drive shaft, featuring chain or belt drive, adjustable white/felt beaters, sturdy metal frame, spring returns, and customizable tension and positioning. Made by Tama, this professional-grade pedal enables drummers to play fast, complex bass drum patterns used in metal, rock, and jazz.

TAMA HP310LW Speed Cobra 310 Twin Pedal

$269.99

Very low stock (1 unit)

Products

Your cart

Learn More

Compare /3

Choose options